Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

EXTRON DTP T DP 4K 230 Transmitter

Forsiden Skærme Tilbehør til skærme EXTRON DTP T DP 4K 230 Transmitter
EXTRON DTP T DP 4K 230 Transmitter (60-1076-12)

EXTRON DTP T DP 4K 230 Transmitter

Varenr.:
60-1076-12
  • Type Andet tilbehør
4.977,-
6.221,25 inkl. moms
Antal:
Beskrivelse

DTP T DP 4K 330


Long Distance DTP Transmitter for DisplayPort

The Extron DTP T DP 4K 330 is a long distance transmitter for sending DisplayPort, audio, and bidirectional RS‑232 and IR signals up to 330 feet (100 meters) over a shielded CATx cable to Extron DTP® 330-enabled products. It provides an effective means of incorporating higher resolution DisplayPort signals with embedded audio into DTP Systems. In addition, the DTP T DP 4K 330 accepts analog stereo audio signals for simultaneous transmission over the same shielded twisted pair cable. It supports video signals at resolutions up to 4K, including 2560x1600. The compact enclosure size and remote power capability make the DTP T DP 4K 330 ideal for discreet placement in lecterns, beneath tables, or wherever needed to meet application requirements.

The HDCP-compliant DTP T DP 4K 330 enables the reliable, long distance transmission of DisplayPort signals. In addition, DDC communication of EDID and HDCP is continuously maintained between a source and display, ensuring direct compatibility and optimal signal transmission between devices. The DTP T DP 4K 330 also provides a connection for sending stereo analog audio to a DTP 330-enabled matrix switcher, switcher, or signal processor. The analog stereo audio signal is sent over the same shielded twisted pair cable as the DisplayPort and control signals, eliminating the need for a separate cable run to support analog audio at the DTP 330-enabled product.

The twisted pair transmitter provides other convenient, integrator-friendly features designed to help simplify installation. The DTP T DP 4K 330 supports simultaneous transmission of bidirectional RS‑232 and IR signals from a control system for AV device control. Also, the transmitter can be remotely powered over the shielded twisted pair cable by a DTP 330-enabled product, allowing both devices to share one power supply.

The DTP T DP 4K 330 can be integrated with an Extron DTP CrossPoint® Presentation Matrix Switcher, or other DTP 330-enabled products to support sources at remote locations. The transmitter is housed in a 1" (2.5 cm) high, quarter rack width metal enclosure. The low profile design of the DTP T DP 4K 330 allows for discreet placement in lecterns and beneath tables.

The DTP output can be configured for compatibility with HDBaseT-enabled displays to send digital video and embedded audio, plus bidirectional RS‑232 and IR signals up to 330 feet (100 meters) over a shielded CATx cable.

Extron recommends Extron-certified XTP DTP 24 shielded twisted pair cable, shielded RJ‑45 plugs, jacks, and couplers engineered for optimum signal transmission with Extron DTP Series products. The XTP DTP 24 cable is certified to 475 MHz, and utilizes a SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield for superior performance and noise immunity.

Features

  • Transmits DisplayPort plus control and analog audio up to 330 feet (100 meters) over a shielded CATx cable — The DTP T DP 4K 330 provides high reliability and maximum performance on an economical and easily installed cable infrastructure.
  • Inputs: One DisplayPort, one 3.5 mm stereo mini jack for audio
  • Output: One DTP® 330 twisted pair output on RJ-45
  • Supports computer and video resolutions up to 4K
  • Supports DisplayPort SST - Single Stream Transport data rates up to 10.8 Gbps
  • Remote power capability — For simplified installation, the transmitter can be remotely powered by a DTP 330-enabled product over the twisted pair connection.
  • DTP output is compatible with HDBaseT-enabled devices — The DTP output can be configured to send video and embedded audio, plus bidirectional RS-232 and IR signals to an HDBaseT-enabled display.
  • Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
  • Compatible with CATx shielded twisted pair cable — The DTP T DP 4K 330 fully supports a maximum transmission distance of 330 feet (100 meters) for all compatible resolutions when used with CATx shielded twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is recommended for optimal performance.
  • Accepts additional analog stereo audio signals — The DTP T DP 4K 330 accepts stereo analog audio signals for simultaneous transmission over the same shielded twisted pair cable. Analog audio is not embedded onto the digital video signal.
  • Bidirectional RS-232 and IR pass-through for AV device control — Bidirectional RS-232 control and IR signals can be transmitted alongside the video signal, allowing remote AV devices to be controlled without the need for additional cabling.
  • HDCP compliant
  • Supports multiple embedded audio formats — The DTP T DP 4K 330 is compatible with a broad range of multi-channel audio signals, providing reliable operation with DisplayPort sources.
  • Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing continuous communication between source and display.
  • Compatible with all DTP 330 Series receivers and DTP 330-enabled products — Enables mixing and matching with desktop and wallplate receivers, as well as other DTP 330-enabled products to meet application requirements.
  • LED indicator for signal presence and power — Provides visual indication of system status for real-time feedback and monitoring of key performance parameters.
  • RJ-45 signal and link LED indicators for DTP port — Provides a means for validating signal flow and operation, allowing quick identification of connectivity issues.
  • JITC Certified — Successfully completed interoperability and information assurance testing for use in government applications and other mission-critical environments.
  • 1" (2.5 cm) high, quarter rack width metal enclosure — With a low profile enclosure, the device can be installed discreetly wherever needed.
  • Highly reliable, energy-efficient external universal power supply included, replacement part #70-775-01 — Provides worldwide power compatibility, with high demonstrated reliability and low power consumption for reduced operating costs.

DTP T/R DP 4K 330
specification
   
   Frame rate1 24, 25, 30 fps
   Chroma sampling1 4:4:4 or 4:2:2
   Color bit depth1 8 bits per color
   Signal type DisplayPort, HDCP
   Max. video data rate 10.8 Gbps (2.7 Gbps per lane)
Video
   Maximum data rate Up to 10.8 Gbps (2.7 Gbps per lane)
   Maximum pixel clock 300 MHz
   Resolution range Up to 2560x1600* @ 60 Hz or
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz
(* reduced blanking)
   Color bit depth 8, 10, or 12 bits — subject to the maximum data rate limit
   Formats RGB and YCbCr digital video
   Standard DisplayPort 1.2, HDCP 1.4
Video input — transmitter
   Number/signal type 1 DisplayPort
   Connector 1 female DisplayPort
Interconnection between transmitter and receiver
   Signal type DTP 330
   Connector 1 female RJ-45 per unit
   Termination standard TIA/EIA T568B
   Signal transmission distance 
      1080p @ 60 Hz Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable
      2560x1600 @ 60 Hz Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable
      4K/UHD @ 30 Hz Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable
   Cable requirements Solid conductor, 24 AWG or better
   Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair)
Video output — receiver
   Number/signal type 1 DisplayPort
   Connectors 1 female DisplayPort
Audio
   Gain Unbalanced output: 0 dB; balanced output +6 dB
   Frequency response 20 Hz to 20 kHz, ±0.5 dB
   THD + Noise 0.03% @ 20 Hz to 20 kHz at maximum output
   S/N >90 dB, at maximum input (unweighted)
   Stereo channel separation >80 dB
   Digital sampling 48 kHz
   Bit depth 16 bit
Audio input
   Signal type 
      Analog audio (over DTP) Stereo (2 channel), balanced/unbalanced
      Digital audio Embedded digital audio on DTP signal
      Embedded digital audio source formats 2-ch PCM, PCM, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS Digital Surround 5.1, DTSES Matrix 6.1, DTS-ES Discrete 6.1
   Connector (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)
   Impedance >10k ohms, DC coupled
   Nominal level -10 dBV (316 mVrms)
   Maximum level +7 dBV (unbalanced)
Audio output
   Signal type 
      Analog audio (over DTP) Stereo (2 channel), balanced/unbalanced
      Digital audio Embedded digital audio on DTP signal
      Embedded digital audio source formats 2-ch PCM, PCM, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS Digital Surround 5.1, DTSES Matrix 6.1, DTS-ES Discrete 6.1
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±0.2 dB channel to channel
   Maximum level (600 ohm) >+14 dBu, balanced
   Connectors 
      Digital audio Female DisplayPort
      Analog audio (1) 3.5 mm captive screw connector, 5 pole
Communications — external device (pass-through, unidirectional or bidirectional)
   Serial control port input/output 
      Transmitter RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port)
      Receiver 1 set of proprietary signals on a female RJ-45 jack
   Serial control port output/input 
      Transmitter 1 set of proprietary signals on a female RJ-45 jack
      Receiver RS-232 via a 3.5 mm, 3 pole captive screw connector
   Baud rate and protocol 300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity
   Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd
   IR control port (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
   IR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx
General
   Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power consumption 
      Transmitter 
         Device 9.4 watts, 12 VDC
         Device and power supply 11.0 watts, 100-240 VAC, 50-60 Hz
      Receiver 
         Device 9.1 watts, 12 VDC
         Device and power supply 11.4 watts, 100-240 VAC, 50-60 Hz
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Thermal dissipation 
      Transmitter 
         Device 13.4 BTU/hr
         Device and power supply 19.2 BTU/hr
      Receiver 
         Device 17.8 BTU/hr
         Device and power supply 25.5 BTU/hr
   Mounting
      Rack mount Yes, with optional 1U high rack shelf
      Furniture mount Yes, with optional under-desk mounting kit
   Enclosure type Metal
   Enclosure dimensions 
      Transmitter 1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
      Receiver 1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
   Product weight 
      Transmitter 0.5 lbs (0.3 kg)
      Receiver 1.0 lb (0.5 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety CE, c-UL, UL
      EMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCI
   Warranty 3 years parts and labor

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.