Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

INTER-TECH Case ATX S-3906 Renegade

INTER-TECH Case ATX S-3906 Renegade (88881273)

INTER-TECH Case ATX S-3906 Renegade

Varenr.:
88881273
EAN:
4260455641388
  • Strømforsyning 0W
  • Type Tower
  • Farve Sort
571,-
713,75 inkl. moms
Forventes på lager 02-04-2024
Antal:
Beskrivelse

S-3906 Renegade


88881273

Are you looking for a special case, that moves your lighting concept into new spheres? Then the S-3906 Renegade is just right for you!
A slightly tinted Tempered Glass side panel and one wide RGB LED strip, which spans C-shaped over the three-dimensional front panel of the case, make the S-3906 the ideal candidate for a high-end system with elaborate LED lighting. This is not only due to the standard 120mm RGB LED fan, that is installed on the rear panel, but also because of the digital 5V RGB control board with PWM, which accommodates up to 7 additional RGB fans, which are managed via the RGB motherboard control header. Space for up to four additional 3-pin fans round off the connection variety of the integrated circuit board.
In the top of the case are, in addition to the magnetic dust filter inserts, all controls. In addition to two USB 2.0 and USB 3.0 ports and HD audio jacks, there is a switch for manually switching through the LED effects. Another removable dust filter under the power supply and a variety of ways to lay the cables, complete the offer.


Features:

  • Front panel with RGB light strip
  • Side panel made of Tempered Glass
  • 1x 120mm RGB fan at the rear included
  • 3pin RGB header connector for 5V RGB motherboard control
  • LED switch to change colour effects
  • RGB control board for up to 7 additional RGB fans and one RGB LED strip
  • PWM fan control for 8 RGB fans as well as four 3pin fans over the RGB control board
  • Two 3.5" bays below the motherboard carrier with separate airflow
  • Place for water cooling in sizes of 120mm and 240mm
  • Power supply adapter in a separate cage in the bottom part
  • Openings for easy laying of cables
  • Easy removable dust filters in the top and below the power supply
  • Slot plates screwed and mesh grid
  • Stands


Specifications:

Size
  • Form factor ATX, mATX, ITX
  • Dimensions (h/w/d) 470 x 215 x 465mm
Installation Dimensions
  • Height CPU cooler (max.) 175mm
  • Length graphics card (max.) 275mm
Drive Bays
  • 5.25" external no
  • 3.5" external no
  • 3.5" internal 2x
  • 2.5" internal 2x
Front connectors
  • USB 3.0 2x
  • USB 2.0 2x
  • Card Reader no
  • Microphone 1x
  • Headphones 1x
Power supply
  • ATX-PSU no
Fan mounting option
  • Front 3x 120mm or 2x 140mm (optional)
  • Rear 1x 120mm (serial, RGB, 6pin connector)
  • Top 2x 120mm or 2x 140mm (optional)
Guarantee / Warranty
  • Warranty 24 months

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.