Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her

TRENDNET LMR200 Reverse SMA to N-Type Cable

Forsiden / Diverse / Mobil Telefoni og GPS Navigation / Kabler / TRENDNET LMR200 Reverse SMA to N-Type Cable
TRENDNET LMR200 Reverse SMA to N-Type Cable (TEW-L202)

TRENDNET LMR200 Reverse SMA to N-Type Cable

Varenr.:
TEW-L202
EAN:
0710931502923
  • Type Antenne
  • Konnektor 1 RP-SMA
  • Konnektor 2 N-Type
243,-
303,75 inkl. moms
Antal:
Beskrivelse

LMR200 Reverse SMA to N-Type Cable
TEW-L202

  • Extend your wireless antenna up to 2 meters (6.5 ft.)
  • Weatherproofed cable for outdoor use
  • Ensure protection from lightning strikes with TRENDnet´s TEW-ASAK Outdoor Arrestor Kit

The LMR200 Reverse SMA to N-Type Cable extends your wireless Antenna up to 2 meters to provide optimal placement for your antenna outdoors. Connect business networks from building to building wirelessly or provide wireless Internet access for hot spot applications! This cable makes wireless communication possible by providing low loss communication between your access point and antenna.

  • Wi-Fi Compliant with 2.4GHz 802.11 b/g & 5GHz 802.11a Devices for extending wireless networks
  • Reverse SMA Female to N-Type Male Connector.
  • Optimal placement of your existing Wi-Fi Device permits you to maximize its wireless performance.
  • Flexible outer conductor allows the tightest bend radius available for any cable of similar size and performance
  • Provides flexible Low-loss communication for wireless antenna
  • 50dB RF Shielding is 10 dB greater than typical single shielded coax (40 dB).
  • Multi-ply bonded outer foil conductor is rated conservatively at > 90 dB.
  • Weatherproof cable design for outdoors exposure with best materials for UV resistance
  • Polyethylene jacketed cable designed for outdoor use
  • Easy and quick deployment into a WLAN environment
  • 2-year limited warranty

Construction
Inner Conductor (Solid BC) 0.044 in. (1.12 mm)
Dielectric (Foam PE) 0.116 in. (2.95 mm)
Outer Conductor (Aluminum Tape) 0.121 in. (3.07 mm)
Over Braid (Tinned Copper ) 0.144 in. (3.66 mm)
Jacket (PE) 0.195 in. (4.95 mm)
Mechanical
Bend Radius: Installation 0.5 in. (12.7 mm)
Bend Radius: Repeated 2.0 in. (50.8 mm)
Bending Moment 0.2 ft-lb (0.27 N-m)
Weight 0.022 lb/ft (0.03 kg/m)
Tensile Strength 40 lb (18.2 kg)
Flat Plate Crush 15 lb/in. (0.27 kg/mm)
Environment
Temperature Operating: -40° C ~ 85°C (-40°F~185°F)
Storage: -70° C ~ 85°C (-94°F~185°F)
Electrical
Cut-off Frequency 39 GHz
Velocity of Propagation 83%
Dielectric Constant 1.45
Time Delay 1.22 nS/ft (4.02 nS/m)
Impedance 50 ohms
Capacitance 24.5 pF/ft (80.3 pF/m)
Inductance 0.061uH/ft (0.20 uH/m)
Shielding Effectiveness > 90 dB
DC Resistance: Inner Conductor Outer Conductor 5.36ohms/1000ft (17.6 ohms/km)
4.9 ohms/1000ft (16.1 ohms/km)
Voltage Withstand 1000 Volts DC
Jacket Spark 3000 Volts RMS
Peak Power 2.5 kW


Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.