SHUTTLE Nano Pc Nc10U3 , Intel

XPC nano NC10U3

• Barebone PC with a black plastic chassis
• Dimensions: 142 × 142 × 42 mm (LWH) = 847 ml
• Weight: 0.4 kg net, 1.2 kg gross
• Hole for Kensington Lock
• Includes vertical stand and 75 / 100 mm VESA mount

• Power consumption in idle mode with 2.5" SSD under Windows 10: ca. 6 W only

• 1) Horizontal
• 2) Vertical with stand
• 3) VESA-mounted behind an appropriate monitor

• This barebone system comes without operating system.
• It is compatible with:
  • Windows 10, 64-bit
  • Linux, 64-bit

• Model: Intel Core i3-8145U (ULV)
• System-on-a-chip architecture (SoC) with integrated memory and graphics controller: no chipset required
• FCBGA1528 package - directly soldered onto the mainboard
• Code name: Whiskey Lake U (8th Generation Intel Core)
• Cores / Threads: 2 / 4
• Clock rate: 1.8 GHz
• Max. Turbo Frequency: 3.9 GHz
• L1/L2/L3 Cache: 128 kB / 512 kB / 4 MB
• TDP wattage: 15 W maximum
• Manufacturing process: 3rd-generation enhanced 14nm++
• Maximum Tjunction Temperature: 100 °C
• Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2

• Built-in CPU cooling fan with 4-pin connector
• Supports temperature-controlled RPM fan speed

• Intel UHD Graphics 620
• GPU clock frequency: 300~1000 MHz
• Execution Units (EUs): 24
• Supports DirectX 12
• Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
• Supports Quick Sync Video and Clear Video HD technology
• Supports up to two independent screens:
  • DisplayPort 1.2 supports Ultra HD @ 60 Hz
  • HDMI 2.0a supports Ultra HD @ 60 Hz

• AMI BIOS in 8 MByte EEPROM with SPI interface
• Supports resume after power failure
• Supports Wake on LAN (WOL)
• Supports Power on by RTC Alarm
• Supports booting from USB devices and SD card reader
• Supports hardware monitoring and watchdog function
• Supports Unified Extensible Firmware Interface (UEFI)
• Supports Firmware TPM v2.0 (fTPM)

• External 65 W power adapter (fanless)
• Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
• Output: 19 V DC, max. 3.42 A, max. 65 W
• DC cable ca. 175 cm with coaxial connector: 5.5 / 2.5 mm (outer/inner diameter)
• The DC-input of the computer supports 19V±5%.
• AC cable, ca. 170 cm, with flat, two-pole Europlug

• 2x SO-DIMM slot with 260 pins
• Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
• Supports DDR4-2666 at 2400 MHz
• Supports Dual Channel mode
• Supports a maximum of 32 GB per DIMM, maximum total size: 64 GB
• Supports two unbuffered DIMM modules (no ECC or registered)

• Supports one Serial ATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
• Device height: 15 mm (max.)
• Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth

• Integrated SD card reader
• Supports SD, SDHC and SDXC memory cards
• Supports booting from SD card

• The M.2 2280 BM slot provides the following interfaces:
  • PCI-Express Gen. 3.0 X4 with up to 4 GB/s data transfer rate
  • SATA v3.0 (max. 6 Gbps)
• It supports M.2 cards with a width of 22 mm
• and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
• Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs with NVMe (with M key)

• Audio Realtek® ALC 662 High-Definition Audio Codec
• 3.5 mm / 4-pole combo audio connector for headphones and microphone
• Digital multi-channel audio output: via HDMI and DisplayPort

• Ethernet Controller Intel i211
• Supports 10 / 100 / 1.000 MBit/s operation (Gigabit)
• Supports WAKE ON LAN (WOL)
• Supports network boot by Preboot eXecution Environment (PXE)
• IEEE 802.3az Energy Efficient Ethernet (EEE)
• Interface: PCIe v2.1

• Built-in M.2-2230-A/E WLAN card and internal antenna
• Single-Chip 1T1R WLAN Controller Realtek RTL8188EE
• Supports IEEE 802.11b/g/n, max. 150 Mbps up-/downstream
• Security: WPA/WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x/i

• USB 3.2 Gen 1 Type-A (max. 5 Gbps, blue)
• USB 3.2 Gen 1 Type-C (max. 5 Gbps)
• SD card reader (supports SD, SDHC, SDXC)
• Power button
• Power LED (blue, flashing when in suspend mode)
• HDD LED (orange)

• DisplayPort 1.2
• HDMI 2.0a
• 2× USB 2.0 Type-A
• Gigabit LAN (RJ45)
• Audio Combo Port for headphones and microphone (3.5 mm jack, 4-pole)
• DC-input connector for external power adapter
• 2× perforation for optional external WLAN antennas

• Serial RS232 COM port (D-Sub, 9-pin)
  Note: The serial connector (COM port) cannot be used if the NC10U3 is operated in vertical position.

• By removing Jumper JP1 (please refer to the Quick Installation Guide) the system will start unconditionally once power is applied.

• Short Jumper JP2 for about 10 seconds to restore factory settings of BIOS.

• Multi-language Quick Installation Guide
• Driver DVD for Windows 10
• VESA mount set (two parts), made of steel, Six screws (4× M4×10, 2× M2.5×3)
• Bracket for a 2.5" drive with eight screws (M3×5)
• Two aluminium stands (110 mm width) with four screws M3×7 for vertical operation
• Four black, rounded rubber feet, ca. 10 mm diameter × 2.5 mm
• Two screws for mounting of M.2 cards
• Power adapter 65 W with AC power cord

• WLN-M: Wireless LAN module with two external antennas, supports WiFi IEEE 802.11n/ac (2.4 / 5 GHz) and Bluetooth 4.0

• Operating temperature range: 0~40 °C
• Relative humidity range: 10~90% (non-condensing)

• EMI: CE, FCC, BSMI, RCM, RED, VCCI
• Safety: CB, BSMI, ETL
• Other: RoHS, Energy Star, ErP
• This device is classed as technical information equipment (ITE) in class B and is intended for use in the living room and office. The CE-mark approves the conformity by the EU directives:
  • (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
  • (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
  • (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
  • (4) 2014/53/EU Radio Equipment Directive (RED)